How to Install Vinyl Flooring: A Step-by-Step Guide

How to Install Vinyl Flooring: A Step-by-Step Guide 1

Categories:

Preparing for Installation

Before installing vinyl flooring, it is important to prepare the surface properly. Follow these steps to ensure a successful installation:

  • Clean the subfloor thoroughly by removing any dirt or debris. If the subfloor is concrete, make sure it is properly cured and free of any moisture issues.
  • Check for levelness, as any bumps or uneven areas can affect the final result of the installation. Use a leveling compound to even out any low spots.
  • Measure the length and width of the room to determine how much flooring material you will need. Purchase an extra 10% of material to allow for cuts and waste.
  • Acclimate the vinyl flooring to the room’s temperature and humidity conditions by leaving it in the room for at least 48 hours before installation.
  • Installing the Vinyl Flooring

    Step 1: Start in the Corner

    Begin installing the vinyl flooring in the corner farthest away from the door. Cut off the tongue side of the first plank before installing it against the wall. This will allow room for expansion and contraction. Immerse yourself further in the subject and uncover more details in this thoughtfully chosen external source. lvp flooring https://www.vanboxelsurplus.com/product-category/flooring/stone-core/, explore new details and perspectives about the subject discussed in the article.

    Step 2: Install the Planks

    Install planks by clicking them together at a 45-degree angle, pressing them firmly until they click into place. Use spacers to create a ¼ inch gap between the wall and the flooring to allow for expansion.

    Step 3: Continue Installation

    Continue to install planks across the room, maintaining the ¼ inch gap between the planks and the wall using spacers. Cut planks to fit around obstacles such as doorways, using a circular saw or jigsaw.

    Step 4: Install the Final Rows

    Install the final rows of planks by applying pressure to fit them into place. Use a pull bar to help with hard-to-reach areas, and cut the last row to fit with a jigsaw or circular saw.

    Completing the Job

    Step 5: Install the Baseboards

    Once the vinyl flooring is installed, install the baseboards to cover the expansion gap. Nail the baseboards to the wall, not the flooring.

    Step 6: Finishing Touches

    Finish the installation by replacing any trim or thresholds, and removing the spacers. Clean the vinyl flooring with a damp mop, avoiding excessive moisture. Discover additional information about the subject in this external source we’ve carefully selected for you. vinyl flooring, obtain worthwhile and supplementary details to enhance your comprehension of the topic.

    How to Install Vinyl Flooring: A Step-by-Step Guide 2

    With these simple steps, you can install vinyl flooring yourself and save money on professional installation costs.

    Wish to dive further into the topic? Visit the related posts we’ve chosen to assist you:

    Click to access this comprehensive guide

    Visit this informative document

    Discover more

    Grasp further